PRECAUTIONSCONTENTSChapter 1 Features and Overview1-1 Features1-2 Buttons and Indicators1-3 Functions and Basic OperationChapter 2 Settings and A
8Chapter 1 Overview and Features1-3 Functions and Basic OperationTo adjust the screen and color1 Screen Adjustment (Automatic Adjustment)● To adju
9Chapter 1 Overview and FeaturesInformation● To check settings, usage time, etc. [Information]Page 23To make useful settings/adjustmentsPower-save Se
10Chapter 1 Overview and FeaturesBasic operation of Adjustment menu[Displaying Adjustment menu and selecting function](1) Press . The Main menu appe
11Chapter 2 Settings and Adjustments2-1 Utility DiskAn “EIZO LCD Utility Disk” (CD-ROM) is supplied with the monitor. The following table shows the
12Chapter 2 Settings and Adjustments2-2 Screen AdjustmentDigital InputWhen digital signals are input, images are displayed correctly based on the pr
13Chapter 2 Settings and Adjustments3 Perform advanced adjustments for the following using the <Screen> menu of the Adjustment menu.● To eli
14Chapter 2 Settings and Adjustments4 Adjust the signal output range.● To adjust color gradation automatically [Range]Every color gradation (0 to
15Chapter 2 Settings and Adjustments2-3 Color AdjustmentSimple adjustment [FineContrast mode]This function allows you to select the best display mod
16Chapter 2 Settings and AdjustmentsAdvanced Adjustments [Adjustment menu]Independent setting and saving of color adjustment are available for each F
17Chapter 2 Settings and AdjustmentsMenu Description Adjustment rangeGain To adjust red, green, and blue to a desired color tone respectively0 to 100
SAFETY SYMBOLSThis manual uses the safety symbols below. They denote critical information. Please read them carefully.WARNINGFailure to abide by the i
18Chapter 2 Settings and Adjustments2-4 Off Timer/Power Saving Settings● To set monitor power-off time [Off Timer]This function allows the monitor t
19Chapter 2 Settings and Adjustments● To set monitor power-saving [VESA DPMS/DVI DMPM] Analog inputThis monitor complies with the VESA DPMS standard
20Chapter 2 Settings and Adjustments2-5 Screen Size Selection● To change screen size [Screen Size]The image with the resolution other than the recom
21Chapter 2 Settings and Adjustments2-6 Power Indicator/EIZO Logo Display Setting● To turn off the Power indicator while a screen is displayed [Powe
22Chapter 2 Settings and AdjustmentsNOTE• The display time of the FineContrast mode remains unchanged.2-8 Disabling DDC/CI Communication● To disabl
23Chapter 2 Settings and AdjustmentsTranslucentSet the transparency for menu display using the following procedure.(1) Choose <Others> from th
24Chapter 2 Settings and AdjustmentsNOTE• For main default settings, refer to “Main default settings (factory settings)” on page 34.2-12 Setting Br
25Chapter 3 Connecting Cables3-1 Connecting Two PCs to the MonitorTwo PCs can be connected to the monitor through the DVI-I and the D-Sub mini 15 pi
26Chapter 3 Connecting Cables● To set input signal selection [Input Signal]The monitor recognizes the connector through which PC signals are input.Wh
27Chapter 4 TroubleshootingChapter 4 TroubleshootingIf a problem still remains after applying the suggested remedies, contact your local dealer.• N
1PRECAUTIONSPRECAUTIONSIMPORTANT• This product has been adjusted specifically for use in the region to which it was originally shipped. If the product
28Chapter 4 TroubleshootingProblems Possible cause and remedy9. Display position is incorrect.• Adjust image position so that it is displayed prop
29Chapter 4 TroubleshootingProblems Possible cause and remedy18. The monitor connected with the USB cable is detected. / USB devices connected to th
30Chapter 5 ReferenceChapter 5 Reference5-1 Attaching an ArmThe stand can be removed and replaced with an arm (or another stand) to be attached to
31Chapter 5 ReferenceAttention• Never use any solvents or chemicals, such as thinner, benzene, wax, alcohol, and abrasive cleaner, which may damage
32Chapter 5 Reference5-3 SpecificationsS2001WLCD Panel 20.1-inch (510 mm) TFT color LCD with anti-glare hard coatingViewing angle*: Horizontal 170°,
33Chapter 5 ReferenceMovable range Tilt Height adjustable stand : 40° Up, 0° DownEZ-UP stand : 25° Up, 0° DownSwivel Height adjustable stand : 35°
34Chapter 5 ReferencePlug & Play VESA DDC 2B / EDID structure 1.3Dimensions (Width) × (Height) × (Depth) mm (inch)Main unit (including Height adj
35Chapter 5 ReferenceOutside Dimensions S2001W (Height adjustable stand)69.5(2.74)435.4(17.1)272.9(10.7)309(12.2)469(18.5)427~509(16.8~20.0)43.8(1.72
36Chapter 5 ReferenceS2201W (Height adjustable stand)333(13.1)298.1(11.7)475.8(18.7)507(20.0)439~521(17.3 20.5)35°35°203.5(8.0) 100(3.9) 203.5(8.0)22
37Chapter 5 ReferenceConnector Pin Assignment• DVI-I connector 1234567891011121314 15161920211718 22 2324C1C2C3C4C5Pin No.SignalPin No.SignalPin No
2PRECAUTIONS WARNINGPlace the unit at the strong and stable place.A unit placed on an inadequate surface may fall and result in injury or equipment da
38Chapter 5 Reference5-4 GlossaryClockThe analog input monitor needs to reproduce a clock of the same frequency as the dot clock of the graphics sys
39Chapter 5 ReferencesRGB (Standard RGB)International standard for “color reproduction and color space” among peripheral devices (such as monitors, p
40Chapter 5 Reference5-5 Preset TimingThe following table shows factory preset video timing (for analog signal only).Mode Dot clockFrequencyPolarity
41Congratulations!The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and te
42For U.S.A. , Canada, etc. (rated 100-120 Vac) OnlyFCC Declaration of ConformityWe, the Responsible Party EIZO NANAO TECHNOLOGIES INC.5710 Warland Dr
43Hinweise zur Auswahl des richtigen Schwenkarms für Ihren MonitorDieser Monitor ist für Bildschirmarbeitsplätze vorgesehen. Wenn nicht der zum Standa
3PRECAUTIONS WARNINGHandle the power cord with care.• Do not place the cord underneath the unit or other heavy objects.• Do not pull on or tie the c
4PRECAUTIONS CAUTIONHandle with care when carrying the unit.Disconnect the power cord and cables when moving the unit. Moving the unit with the cord
5PRECAUTIONSLCD PanelIn order to suppress the luminosity change by long-term use and to maintain the stable luminosity, use of a monitor in lower brig
6CONTENTSCONTENTSPRECAUTIONS ..... 1LCD Panel .....
7Chapter 1 Overview and FeaturesChapter 1 Features and OverviewThank you very much for choosing an EIZO color LCD monitor.1-1 Features• 20.1 (S200
Commentaires sur ces manuels