Eizo FLEXSCAN MX240W Manuel d'utilisateur télécharger pdf (Page 15)

3. Screen Adjustment and Settings

Adjust by using <Screen> menu in the Adjustment menu.

(1)Vertical bars appear on the screen

Use the <Clock> adjustment.

Select the <Clock> and eliminate the vertical bars by using and of the Control buttons.

Do not continuously press the Control buttons, as the adjustment value will change quickly and

make it difﬁcult to locate the most suitable adjustment point. If the horizontal ﬂickering, blur

or bars appear, proceed to <Phase> adjustment as follows.

(2)Horizontal ﬂickering, blurring or bars appear on the screen.

Use the <Phase> adjustment.

Select the <Phase> and eliminate the horizontal ﬂickering, blurring or bars by using and

buttons.

NOTE

• Horizontal bars may not completely disappear from the screen depending on the PC.

(3)The screen position is incorrect.

Use the <Position> adjustment.

The correct displayed position of the monitor is decided because the number and the position of

the pixels are ﬁxed. The <Position> adjustment moves the image to the correct position.

Select <Position> and adjust the position by using , , and . If vertical bars of distortion

appear after ﬁnishing the <Position> adjustment, return to <Clock> adjustment and repeat the

previously explained adjustment procedure. ("Clock" => "Phase" => "Position")

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 39 40

Pas de commentaire

Eizo FLEXSCAN MX240W Manuel d'utilisateur Page 15