Eizo FlexScan EV2023W Manuel d'utilisateur télécharger pdf (Page 31)

Chapter 3 Connecting Cables

●

To set input signal selection [Input Signal]

Setting Function

Auto The monitor recognizes the connector through which

PC signals are input.

When either PC is turned off or enters the power-

saving mode, the monitor automatically displays

signals of another PC.

Manual The monitor detects only the PC’s signals currently

displaying automatically. Select an active input signal

with .

[Input signal setting]

(1) Choose <Others> from the Adjustment menu, and press

(2) Choose <Input Signal> from the <Others> menu, and press .

The <Input Signal> menu appears.

(3) Select “Auto” or “Manual” with or , and press .

The setting is completed.

NOTE

• When “Auto” is selected for <Input

Signal>, the monitor’s power-saving

function works only when the two

PCs are in the power-saving mode.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 52 53

Pas de commentaire

Eizo FlexScan EV2023W Manuel d'utilisateur Page 31