Eizo FLEXSCAN F980 Manuel d'utilisateur télécharger pdf (Page 13)

1 INSTALLATION

• The AUTO-SIZING function is intended for use on Macintosh, and

IBM compatibles running Windows. It may not work properly if either

of the following applies:

- An AT-compatible PC running MS-DOS (not Windows).

- The background color for the “wallpaper” or “desktop” pattern is set

to black.

• Some signals from the graphics board may not function properly.

• A solid-color screen (i.e. red, green, blue) may appear for an instant

while performing the AUTO-SIZING function, this phenomenon is not

a failure.

1-3 Setting the Resolution

The following look-up table shows the maximum (Non-interlaced)

vertical refresh rates for this model with regard to standard resolutions

set forth by VESA. The best way to see if the monitor will work with a

given resolution and rate, is to compare the vertical refresh rate of the

graphics board to the monitor’s range (Refer to the graphics board

manual for specification). If the refresh rate is within the specified range

of the monitor, it should operate properly.

Maximum Vertical Refresh rate (Hz)

~1024 x 768 160

1280 x 1024 127

1600 x 1200 109

1856 x 1392 91

1920 x 1440 91

2048 x 1536 85

What is Resolution?

Resolution is expressed as the number of dots (pixels) displayed on

the screen. A larger number of dots produces a more sharply defined

(a higher-resolution) image.

Note that for a given screen size the dot size decreases as the number

of dots increases: a 640 × 480 (dot × line) resolution uses larger pixels

than a 1024 × 768 resolution. The display size of a given font therefore

varies according to the resolution. Higher resolutions allow you to

display more information on the screen.

Horizontal

Scan

Frequency

(kHz)

30-137

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 57 58

Pas de commentaire

Eizo FLEXSCAN F980 Manuel d'utilisateur Page 13