Eizo FLEXSCAN F980 Manuel d'utilisateur télécharger pdf (Page 24)

2 ADJUSTMENTS & SETTINGS USING THE SCREENMANAGER

Adjusting the Custom Mode

Cutoff and Gain adjustments

Monitors use red, green and blue (R, G, and B) to convey color

information. They use an additive method to combine different

amounts of the primary colors to produce a desired color. In other

words, monitors start with no light (black) and add percentages of

red, green and blue to make colors. White is usually produced by

adding the same amount of all three colors, where black is usually

produced by adding no color.

However, colors are not only determined by the balance but also the

intensities of R, G, and B (how bright they are) which we call Gain,

and the saturation of R, G and B (how vivid or dull they are) which

we call Cutoff.

• If only a quick setting is required, that is close to the desired color,

but not exact, skip making any changes to the Cutoff adjustment

(step 4). If a precise match is desired, adjustment of the Cutoff

levels must be made. We recommend that for exact matching, use a

color calibrator.

(1) Set the display to maximum brightness and contrast.

(3) Set the color temperature.

(5) Adjust the Gain.

(7) Readjust the contrast in the "Screen" menu to get the best

image clarity..

(4) Adjust the Cutoff.

(2) Return to the "Color" menu and select the "Custom mode" setting.

(6) Select the "Save" icon and then press the ENTER key.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 57 58

Pas de commentaire

Eizo FLEXSCAN F980 Manuel d'utilisateur Page 24