Eizo ColorEdge CG276 Manuel d'utilisateur télécharger pdf (Page 20)

Chapter2AdjustingScreens

●

Adjusting Gamma

Gamma can be adjusted. The brightness of the monitor varies depending on the input signal, however, the

variation rate is not proportional to the input signal. To keep the balance between the input signal and the

brightness of the monitor is called as “Gamma correction”.

Setting Range

1.6 - 2.7, Standard

Procedure

1. Choose “Color” from the Adjustment menu, and press

2. Choose “Gamma” from “Color”, and press

3. Use

or for adjustment.

4. Press

to exit.

Note

• The default setting for each Adobe

RGB/sRGB/EBU/REC709/SMPTE-C/DCI mode is set to “Standard”, which is the

gamma in conformity with each standard.

• The gamma curve can be adjusted to L* by using ColorNavigator. For details, refer to the ColorNavigator User’s Manual

(on the CD-ROM).

●

Adjusting Hue

This function allows you to adjust the hue.

Setting Range

-100 to 100

Procedure

1. Choose “Color” from the Adjustment menu, and press

2. Choose “Advanced Settings” from “Color”, and press

3. Choose “Hue”, and press

4. Use

or for adjustment.

5. Press

to exit.

Attention

• Using this function may make some color gradations unavailable for display.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 74 75

Pas de commentaire

Eizo ColorEdge CG276 Manuel d'utilisateur Page 20