Eizo ColorEdge CG276 Manuel d'utilisateur télécharger pdf (Page 50)

Chapter7Reference

7-3. Making Use of USB (Universal Serial Bus)

This monitor has a USB hub. It works as a USB hub when connected to a USB-compatible PC, allowing the

connection of peripheral USB devices.

●

System Requirement

• A PC equipped with a USB port.

• Windows 8 / Windows 7 / Windows Vista / Windows XP / Windows 2000 or Mac OS X 10.2 or later and

Mac OS 9.2.2

• USB cable

Attention

• This monitor may not work depending on PC, OS or peripheral devices. For USB compatibility of peripheral devices,

contact their manufactures.

• Devices connected to the USB upstream port and USB downstream port work when the monitor is in power saving

mode or when the power button of the monitor is Off. Therefore, power consumption of the monitor varies with

connected devices even in the power saving mode.

• When the main power of the monitor is Off, device connected to the USB downstream port does not operate.

●

Procedure

1. Connect the signal cable between a PC and the monitor, and turn on the PC.

2. Using the USB cable, connect the computer’s downstream port and the monitor’s upstream port 1.

3. Connect the peripheral USB device to the USB downstream port of the monitor.

Note

• By default, USB upstream port 1 is enabled. To connect two PCs, see “3-8. Switching USB Port Automatically” (page 33).

USB

downstream

port

USB

upstream

port

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 74 75

Pas de commentaire

Eizo ColorEdge CG276 Manuel d'utilisateur Page 50