Eizo ColorEdge CG276 Manuel d'utilisateur télécharger pdf (Page 39)

Chapter4SelfCalibration

●

Setting Adjustment Target

Set the calibration targets for SelfCalibration.

Procedure

1. Choose “SelfCalibration” from the Adjustment menu, and press

2. Choose “Settings” from “SelfCalibration”, and press

3. Choose “Target” from “Settings”, and press

4. Use

or to select the mode to change, and press .

The target setting menu appears.

5. Use or to select the items to change, and press .

Settings Adjustable Range Setting

Brightness 30cd/m

to200cd/m

Setthebrightnessofthemonitorusing

thebrightnessvalue(cd/m

WhitePoint White(x)/White(y) 0.2400-0.4500

SetthemonitorWhitePointusingthe

colorcoordinateorTemperature.

Temperature 4000K-10000K

(100KUnit)

ColorGamut ColorGamut Native Donotadjustthecolorgamut.

User Adjustthecolorgamut.

ForeachofRed/Green/

Blue

0.0000-1.0000 Tocalibratethemonitorcolor

reproductiongamut,setthecolor

coordinatesforred,green,andblue.

Clipping On/Off Thisfunctionallowsyoutodisplaythe

monitorwiththecolorsbasedonthe

speciedcolorgamut.

(“Tosetclipping”(page22))

Gamma 1.6-2.7

(0.1Unit)

Setthemonitorgammavalues.

 Whenthecolorcoordinatesareset,thetemperaturechangesto“User”.

 Whenthetemperatureisset,thexandycoordinatesofthewhitepointaresetautomatically.

 Thesebecome“Fixed”whencalibratingwithColorNavigator.

6. Use or for adjustment.

7. Press

to exit.

The calibration targets are set.

Attention

• Only set the color gamut calibration when the target color range is precisely known.

• If ColorNavigator was used to calibrate the grey balance, do not change the gamma setting values.

4-2. Executing SelfCalibration

Procedure

1. Choose “SelfCalibration” from the Adjustment menu, and press

2. Choose “Execute” from “SelfCalibration”, and press

The built-in calibration sensor is activated, and SelfCalibration is executed.

Attention

• To execute SelfCalibration, it is necessary to set the calibration details. For more information, see “4-1. Setting

Calibration Details” (page 36).

• After selecting “Execute”, aging may be executed before the built-in calibration sensor is executed.

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 74 75

Commentaires sur ces manuels

Pas de commentaire

Eizo ColorEdge CG276 Manuel d'utilisateur Page 39

Commentaires sur ces manuels

Produits connexes et manuels pour Affichages LED Eizo ColorEdge CG276