Eizo ColorEdge CG276 Manuel d'utilisateur télécharger pdf (Page 38)

Chapter4SelfCalibration

●

Set the mode for which SelfCalibration is executed.

Set the mode to execute SelfCalibration (CAL1/CAL2/CAL3).

Procedure

1. Choose “SelfCalibration” from the Adjustment menu, and press

2. Choose “Settings” from “SelfCalibration”, and press

3. Choose “Mode Selection” from “Settings”, and press

4. Use

or to select the mode to change, and press .

5. Select “On” or “Off” with

or .

6. Press

to exit.

Note

• When “Other Modes” is set to “On”, the monitor color reproduction area is updated and the display in each color

mode will be adjusted as follows:

- In any mode other than CAL mode, the temperature is adjusted so that it is as close as possible to the specied

value.

- In Adobe RGB/sRGB/EBU/REC709/SMPTE-C/DCI modes, the gamut values are adjusted so that they are close to

each specied value.

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 74 75

Pas de commentaire

Eizo ColorEdge CG276 Manuel d'utilisateur Page 38