Eizo ColorEdge CG276 Manuel d'utilisateur télécharger pdf (Page 42)

Chapter5PowerSavingFunctions

5-2. Sets the brightness of the indicator

The brightness of the power indicator (blue) and the function indicator below the operation keys when the screen is

displayed can be set. (The both indicators are set to light up when the power is switched on, and are set to 4 by

default.)

Procedure

1. Choose “PowerManager” from the Adjustment menu, and press

2. Choose “Indicator” from “PowerManager”, and press

3. Select the indicator brightness “Off” or in the range from 1 to 7 with

or as desired.

4. Press

to exit.

5-3. Setting DisplayPort Power Save

This function allows you to change the power setting of the DisplayPort of the monitor.

Attention

• For the “On” setting, the position of the window may be changed when the signal is switched. In such a case, turn the setting

to “Off”.

Procedure

1. Press

to turn off the monitor.

2. Holding

down, press for at least two seconds to turn on the monitor.

The “Optional Settings” menu appears.

3. Choose “DP Power Save” from “Optional Settings”, and press .

4. Select “On” or “Off” with

or , and press .

5. Select “Finish” with

or .

6. Press

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 74 75

Pas de commentaire

Eizo ColorEdge CG276 Manuel d'utilisateur Page 42